COS230102100 VE Transfer switch

Description

The COS230102100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator or between an inverter and shore power.

The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output.

The transfer switch is situated between a generator or shore power and the inverter.

If the voltage level or the frequency of the generator or the shore power varies on input 1, the transfer switch will switch to the inverter on input 2.

Once the generator or the shore supply has remained continuously stable, the transfer will switch back to input 1 with a delay of approximately 10 seconds. This way, the appliances that are connected to the output are protected against damage from voltage drops.

During transfer between one of the power sources from input 1 to input 2 or vice versa, the appliances are not supplied with power for a short time. Because of this, computers, electronic devices etc., that are connected to this group might lose data.

The transfer switch can be used with any type of inverter, but the best results, however, are obtained with an inverter from Victron Energy.

The VE Transfer Switch is available in two models which can be found here:

• 5KVA, single phase, 200-250Vac
• 10KVA, single phase, 200-250Vac

for more information on Victron transfer switches please click here